Eagle Installation

Install your Eagle 4G or WiFi

Install your Eagle 4G or WiFi

Get your Eagle camera installed in no time by following either the videos or the step-by-step instructions below. Step 1: Select the Location Before you start, think about the areas that...

View Instructions
Set Up your Eagle Camera

Set Up your Eagle Camera

Let's get started and have your new camera up and running in no time! In this page we will go through the following steps: Step 1: Create an Account Step...

View Instructions
Customize Your Eagle Camera Notification Settings

Customize Your Eagle Camera Notification Settings

With push notifications straight to your smartphone or tablet, you'll never miss a moment of what's happening on your property. And the best part? Customizing your notification settings is a...

View Instructions
Customize Motion Detection PIR on Your Eagle Camera

Customize Motion Detection PIR on Your Eagle Camera

The PIR (Passive Infrared) technology in our Eagle 4G or WiFi camera, is designed to detect human motion only so you won't be bothered with unnecessary notifications from animals, cars,...

View Instructions
Recommended Settings for Your Eagle 4G or WiFi Camera

Recommended Settings for Your Eagle 4G or WiFi Camera

Want to get the most out of your Eagle 4G or WiFi camera? We at AnywhereCam have some recommendations for you! Night Vision mode:We recommend setting it to Auto-mode. This...

View Instructions

Frequently Asked Questions

How can I reset my Eagle camera?

If you need to reset or power cycle your camera, please refer to either the video guide on Step 2 or follow these step-by-step instructions:

1. Open the weatherproof flap on your camera to access the reset button.
2. Press and hold the reset button for 10 seconds.
3. Listen for the voice prompt saying "Camera reset succeeded." If you do not hear this prompt, repeat the process.

If holding the reset button for more than 30 seconds does not result in a command, you can toggle the power switch.

1. Toggle the switch off and wait for 10 seconds.
2. Turn the switch back on, and your camera should be reset.

Have Other Questions?

If you need help to setup your camera, please contact us and we will be glad to help.

Contact Us